| Customization: | Available |
|---|---|
| Industrial Use: | Food, Pharmaceutical, Apparel, Agriculture, Printing/Lamination/Packaging |
| Transparency: | Transparent |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Clear BOPP film
(Material requirements)
| Property | Unit | Test Method | Typical Values | ||
| Thickness | Micron | Internal | 20 | 25 | 30 |
| Tensile MD Strength TD |
Mpa | ASTM-D-882 | ≥130 | ≥130 | ≥130 |
| Mpa | ASTM-D-882 | ≥220 | ≥220 | ≥220 | |
| Ultimate Elongation MD TD |
% | ASTM-D-882 | ≤180 | ≤180 | ≤180 |
| % | ASTM-D-882 | ≤65 | ≤65 | ≤65 | |
| Thermal Shrinkage MD TD |
% | ASTM-D-1894 | ≤4 | ≤4 | ≤4 |
| ≤2.5 | ≤2.5 | ≤2.5 | |||
| Wetting Tension | Dyne/cm | ASTM-D-2578 | 38 | 38 | 38 |
| Haze | % | ASTM-D-1003 | ≤1.5 | ≤1.5 | ≤1.5 |
| WVTR | g /(m2•24 hr) 40 ºC | ASTM E 96 | ≤2 | ≤2 | ≤2 |
Clear PET film
(Material requirements)
| ITEM | PET FILM(PRINTING/LAMINATION GRADE), 10 MICRON | ||||
| NO. | Properties | Unit | Standard Values | Test Values | |
| 1 | Film Thickness Tolerance | % | 10μm | ±4% | 10.04 |
| 2 | Tensile Strength MD | Mpa | >= | 180 | 210.00 |
| Tensile Strength TD | >= | 180 | 205.00 | ||
| 3 | Elongation at Break MD | % | >= | 100 | 105.50 |
| Elongation at Break TD | >= | 100 | 112.00 | ||
| 4 | Modules of Elasticity MD | Mpa | >= | 4000 | 4212.00 |
| Modules of Elasticity TD | >= | 4000 | 4365.00 | ||
| 5 | Heat Shrinkage MD | % | <= | 2.0 | 1.26 |
| Heat Shrinkage TD | <= | 0.2 | -0.05 | ||
| 6 | Coefficient of Friction | <= | 0.6 | 0.530/0.500 | |
| 7 | Haze | % | <= | 3 | 2.10 |
| 8 | Density | g/cm2 | 1.39-1.41 | 1.40 | |
| 9 | Light Transmission | % | >= | 89 | 90.50 |
| 10 | Gloss | % | >= | 100.00 | 128.00 |
| 11 | Surface Tension | mN/m | >= | 50 | 56.00 |
| ITEM | PET FILM(PRINTING/LAMINATION GRADE), 12 MICRON (48Ga) | ||||
| NO. | Properties | Unit | Standard Values | Test Values | |
| 1 | Film Thickness Tolerance | % | (48Ga)12μm | ±4% | 12.06 |
| 2 | Tensile Strength MD | Mpa | >= | 200 | 238.00 |
| Tensile Strength TD | >= | 200 | 230.00 | ||
| 3 | Elongation at Break MD | % | >= | 100 | 114.00 |
| Elongation at Break TD | >= | 100 | 120.00 | ||
| 4 | Modules of Elasticity MD | Mpa | >= | 4000 | 4434.00 |
| Modules of Elasticity TD | >= | 4000 | 4670.00 | ||
| 5 | Heat Shrinkage MD | % | <= | 2.0 | 1.33 |
| Heat Shrinkage TD | <= | 0.2 | -0.07 | ||
| 6 | Coefficient of Friction | <= | 0.6 | 0.550/0.520 | |
| 7 | Haze | % | <= | 3 | 2.10 |
| 8 | Density | g/cm2 | 1.39-1.41 | 1.40 | |
| 9 | Light Transmission | % | >= | 89 | 91.00 |
| 10 | Gloss | % | >= | 100.00 | 129.00 |
| 11 | Surface Tension | mN/m | >= | 50 | 58.00 |
| 12 | Transmission/ H2O(38ºC,90%RH) | g/m2·24hr | <= | 3.3 | |
){kind=link}